洪浩喬
職稱 教授
姓名 洪浩喬
電子郵件 hchong@nycu.edu.tw
聯絡電話 03-5712121 ext54375
網站 http://amsdft.cn.nctu.edu.tw/
研究專長 Training methods and software modeling of artificial neural networks, analog computing in memory circuit design, Mixed-signal circuit design including ADC, DAC, audio codec, PLL, filters, wireless power, power management, high speed serial interface, and sensor interfaces; design-for-testability (DfT), built-in self-test (BIST) and calibration techniques for mixed-signal circuits.
授課領域 Analog IC Design
實驗室 前瞻混合訊號電路暨可測試設計實驗室
自傳
Hao-Chiao Hong received the B.S., M.S., and Ph.D. degrees in Electrical Engineering from National Tsing-Hua University, Taiwan, in 1990, 1992, and 2003, respectively. From 1997 to 2001, he was with Taiwan Semiconductor Manufacturing Company (TSMC) where he developed mixed-signal IPs for customers and process vehicles. He joined Intellectual Property Library Company, HsinChu, Taiwan, as the senior manager of the Analog IP Department in Aug. 2001. He has been with National Chiao Tung University (NCTU), Hsinchu, Taiwan since Feb., 2004 where he is currently a professor of the Electrical and Computer Engineering department.

His main research interests include the training method and software modeling of artificial neural networks, analog computing in memory circuit design, the design-for-testability (DFT), built-in self-test (BIST), and calibration techniques for mixed-signal systems, and high performance mixed-signal circuit design. He received the Best Paper Awards from the 2009 International Symposium on VLSI Design, Automation & Test (VLSI-DAT) and 2016 VLSI Test Technology Workshop.

Dr. Hong served as the executive secretary of the Mixed-signal and RF Consortium of Ministry of Education, Taiwan from 2006 to 2008, and the executive secretary of the Heterogeneous Integration Consortium of Ministry of Education, Taiwan, from 2008 to 2009. He also served as the general chair of the sixth VLSI Test Technology Workshop (VTTW) in 2012, and the program chair of the fifth VTTW in 2011. He is a life member of Taiwan IC Design (TICD) Association and a life member of VLSI Test Technology Forum (VTTF), Taiwan.
年度 論文名稱
2020 Hao-Chiao Hong and Chih-Ko Yang, Interleaved write scheme for improving sequential write throughput of multi-chip MLC NAND Flash memory systems, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 67, 12, pp. 4946-4959, Dec. 2020" target='_blank'>Hao-Chiao Hong and Chih-Ko Yang, Interleaved write scheme for improving sequential write throughput of multi-chip MLC NAND Flash memory systems, IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 67, 12, pp. 4946-4959, Dec. 2020
2020 Chi-Yi Lo and Hao-Chiao Hong, A 0.9 pJ/b, reference clock free, delay-based, all-digital coherent BPSK demodulator, IEEE Solid-State Circuits Letters, vol. 3, pp. 498-501, Nov. 2020" target='_blank'>Chi-Yi Lo and Hao-Chiao Hong, A 0.9 pJ/b, reference clock free, delay-based, all-digital coherent BPSK demodulator, IEEE Solid-State Circuits Letters, vol. 3, pp. 498-501, Nov. 2020
2019  Micromachines, Vol.10, No.11, pp. Nov., 2019. (SCI), Nov. 2019" target='_blank'>Yi Chiu, Hsuan-Wu Liu,  and Hao-Chiao Hong, "A Robust Fully Integrated Digital-Output Inductive CMOS-MEMS Accelerometer with Improved Inductor Quality Factor," Micromachines, Vol.10, No.11, pp. Nov., 2019. (SCI), Nov. 2019
2019 IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 9, pp. 3467-3479, Sep., 2019 (SCI), Sep. 2019" target='_blank'>Hao-Chiao Hong and Long-Yi Lin, "Accurate and Fast On-Wafer Test Circuitry for Device Array Characterization in Wafer Acceptance Test," IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 9, pp. 3467-3479, Sep., 2019 (SCI), Sep. 2019
2019 IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 5, pp. 1840-1852, May, 2019 (SCI)., May. 2019" target='_blank'>Hao-Chiao Hong, Long-Yi Lin, and Yi Chiu "Design of a 0.20-V to 0.25-V, Sub-nW, Rail-to-Rail, 10-bit SAR ADC for Self-Sustainable IoT Applications," IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 5, pp. 1840-1852, May, 2019 (SCI)., May. 2019
2018 Micromachines, Vol. 9, No.6, pp. 1-15, Jun., 2018 (SCI)., Jun. 2018" target='_blank'>Yi Chiu and Hao-Chiao Hong, "Rigid-Flex PCB Technology with Embedded Fluidic Cavities and Its Application in Electromagnetic Energy Harvesters," (Regular paper) Micromachines, Vol. 9, No.6, pp. 1-15, Jun., 2018 (SCI)., Jun. 2018
2018 J. Phys.: Conf. Ser., 1052, 012078, Jan. 2018, Jan. 2018" target='_blank'>Yi Chiu and Hao-Chiao Hong, "Electromagnetic energy harvester with embedded ferrofluid in PCB technology,"  J. Phys.: Conf. Ser., 1052, 012078, Jan. 2018, Jan. 2018
2016 Smart Materials and Structures, Vol. 25, No.12, pp. 1-8, Dec., 2016 (SCI) , Dec. 2016" target='_blank'>Yi Chiu, Hao-Chiao Hong, and Wei-Hung Hsu, "Wideband vibrational electromagnetic energy harvesters with nonlinear polyimide springs based on rigid-flex printed circuit boards technology," Smart Materials and Structures, Vol. 25, No.12, pp. 1-8, Dec., 2016 (SCI) , Dec. 2016
2016 IEEE Sensors Journal, Vol. 16, No. 12, pp. 4856- 4865, Jun., 2016 (SCI), Jun. 2016" target='_blank'>Hao-Chiao Hong, Yun-Tse Chen, Shao-Feng Hung, Chin-Cheng Wu, and Yi Chiu, "An angle demodulator IC using periodically reset integration for the path matched differential interferometry based sensors," (Regular paper) IEEE Sensors Journal, Vol. 16, No. 12, pp. 4856- 4865, Jun., 2016 (SCI), Jun. 2016
2015 J. Phys.: Conf. Ser., Vol. 660, No. 1, pp. 12083-12086, Jan. 2015, Jan. 2015" target='_blank'>Yi Chiu, Hao-Chiao Hong, and W.-H. Hsu, "Nonlinear electromagnetic energy harvesters fabricated by rigid-flex printed circuit board technology," J. Phys.: Conf. Ser., Vol. 660, No. 1, pp. 12083-12086, Jan. 2015, Jan. 2015
2014 IEEE Transactions on Instrumentation and Measurement, Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI), Dec. 2014" target='_blank'>Shao-Feng Hung and Hao-Chiao Hong, "A Fully Integrated BIST ΔΣ ADC Using the In-Phase and Quadrature Waves Fitting Procedure," (Regular paper) IEEE Transactions on Instrumentation and Measurement, Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI), Dec. 2014
2014 IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6, pp. 1238–1247, June, 2014 (SCI) , Jun. 2014" target='_blank'>Hao-Chiao Hong, Yung-Shun Chen, and Wei-Chieh Fang,"14 GSps four-bit noninterleaved data converter pair in 90 nm CMOS with built-in eye diagram testability," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6, pp. 1238–1247, June, 2014 (SCI) , Jun. 2014
2014 Sensors and Materials, Vol. 26, No. 2, pp. 95–108, February, 2014 (SCI), Feb. 2014" target='_blank'>Yi Chiu, Tsung-Chih Huang, and Hao-Chiao Hong, "A Three-Axis Single-Proof-Mass CMOS-MEMS Piezoresistive Accelerometer with Frequency Output," Sensors and Materials, Vol. 26, No. 2, pp. 95–108, February, 2014 (SCI), Feb. 2014
2013 IEEE Journal of Microelectromechanical Systems, Vol. 22, No.6, pp. 1285-1295, Dec., 2013. (SCI), Dec. 2014" target='_blank'>Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu, "Development and Characterization of a CMOS-MEMS Accelerometer with Differential LC-Tank Oscillators," IEEE Journal of Microelectromechanical Systems, Vol. 22, No.6, pp. 1285-1295, Dec., 2013. (SCI), Dec. 2014
2012 Shao-Feng Hung and Hao-Chiao Hong, “Experimental Results of Testing a BIST Σ–Δ ADC on the HOY Wireless Test Platform,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 28, Issue 5, pp. 571-584, Nov. 2012, DOI:10.1007/s10836-012-5302-7 (SCI), Dec. 2014
2012 Hao-Chiao Hong, “A Static Linear Behavior Analog Fault Model for Switched-Capacitor Circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), Vol. 31, No.4, pp. 597-609, Apr., 2012. (SCI), Dec. 2014
2011 Sheng-Chaun Liang and Hao-Chiao Hong, “A digitally testable Σ-Δ modulator using the decorrelating Design-for-digital-testability scheme,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 19, No. 3, pp. 503-507, Mar., 2011. (SCI), Dec. 2014
2010 Hao-Chiao Hong, Fang-Yi Su, and Shao-Feng Hung, “A fully integrated built-in-self-test Σ-Δ ADC based on the modified controlled sine wave fitting procedure,” IEEE Transactions on Instrumentation and Measurement (TIM), Vol. 59, No. 9, pp. 2334-2344, Sept., 2010. (SCI), Dec. 2014
2009 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A built-in-self-test S-D ADC prototype,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 25, No. 2-3, pp. 145-156, Jun., 2009 (SCI), Dec. 2014
2009 Hao-Chiao Hong and Sheng-Chaun Liang, “A decorrelating design-for-digital- testability scheme for S-D modulators,” IEEE Transactions on Circuits and Systems I: Regular Papers (TCAS-I), Vol. 56, No. 1, pp. 60-73, Jan., 2009 (SCI), Dec. 2014
2007 Hao-Chiao Hong, “A Fully-settled linear behavior plus noise model for evaluating the digital stimuli of the design-for-digital-testability Sigma-Delta modulators,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 23, pp.527-538, Dec., 2007 (SCI), Dec. 2014
2007 Hao-Chiao Hong, “A design-for-digital-testability circuit structure for Sigma-Delta modulators,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 15, No. 12, pp. 1341-1350, Dec., 2007 (SCI), Dec. 2014
2007 Hao-Chiao Hong and Guo-Ming Lee, “A 65 fJ/conversion-step 0.9-V 200-KS/s rail-to-rail 8-bit successive approximation ADC,” IEEE Journal of Solid-State Circuits (JSSC), Vol. 42, No. 10, pp. 2161-2168, Oct., 2007 (SCI), Dec. 2014
2004 Hao-Chiao Hong and Cheng-Wen Wu, “Selection of high-order analog response extractor for S-D modulation based analog built-in self-test applications,” International Journal of Electrical Engineering, Vol. 11, No.2, pp.103-115, May, 2004., Nov. 2013
2003 Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, Cheng-Wen Wu, and Ding-Ming Kwai, “Practical considerations in applying Sigma-Delta modulation-based analog BIST to sampled-data systems,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing (TCAS-II), Vol. 50, No. 9, pp. 553-566, Sep., 2003 (SCI), Dec. 2014
年度 論文名稱
2019 in Proc. IEEE Sensors Conference, Montreal, Canada, Oct., 2019, pp. 1-4 (IEEE), Oct. 2019" target='_blank'>Y. Chiu, Y.-Z. Chen, C.-C. Hsieh, and H.-C. Hong, "A Wireless Gauge Pressure Sensor with Enhanced Sensitivity Fabricated by Flexible PCB Technology for Intracranial Pressure Sensing," in Proc. IEEE Sensors Conference, Montreal, Canada, Oct., 2019, pp. 1-4 (IEEE), Oct. 2019
2019 presented in IEEE International Symposium on Integrated Circuits and Systems (ISICAS), Venice, Italy, Aug., 2019, Aug. 2019" target='_blank'>H.-C. Hong and L.-Y. Lin, "Accurate and Fast On-Wafer Test Circuitry for Device Array Characterization in Wafer Acceptance Test," presented in IEEE International Symposium on Integrated Circuits and Systems (ISICAS), Venice, Italy, Aug., 2019, Aug. 2019
2019 Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Sapporo, Japan, May, 2019, pp. 1-4, May. 2019" target='_blank'> K.-C. Wu, M.-S. Wu, and H.-C. Hong, " Multiple correlation estimation based digital background calibration scheme for pipelined ADCs," Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Sapporo, Japan, May, 2019, pp. 1-4, May. 2019
2018 presented in Progress In Electromagnetics Research Symposium (PIERS), Toyama, Japan, Aug., 2018, Aug. 2018" target='_blank'>H.-C. Hong, Y. Chiu, and C.-N. Kuo, "Design of high-Q coils on flexible PCB for resonant magnetic coupling wireless power transfer systems," presented in Progress In Electromagnetics Research Symposium (PIERS), Toyama, Japan, Aug., 2018, Aug. 2018
2018 Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-4, May. 2018" target='_blank'>H.-C. Hong and Y. Chiu, "A 0.20-V to 0.25-V, Sub-nW, rail-to-rail, 10-bit SAR ADC for self-sustainable IoT applications," Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-4, May. 2018
2018 Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-5, May. 2018" target='_blank'>M.-S. Wu and H.-C. Hong, "Digital background calibration scheme for Pipelined ADCs using multiple-correlation estimation," Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-5, May. 2018
2018  Proc. Workshop on Synthesis and System Integration of Mixed Information Technologies (SASIMI 2018), Matsue, Japan, Mar., 2018, pp. 26-29, Mar. 2018" target='_blank'> C,-K, Yang and H.-C. Hong, "A firmware for improving the writing performance of multi-chip MLC NAND flash memory systems," Proc. Workshop on Synthesis and System Integration of Mixed Information Technologies (SASIMI 2018), Matsue, Japan, Mar., 2018, pp. 26-29, Mar. 2018
2017 Proc. the 17th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Kanazawa, Japan, Nov., 2017, Nov. 2017" target='_blank'>Y. Chiu and H.-C. Hong, " Electromagnetic energy harvester with embedded ferrofluid in PCB technology," Proc. the 17th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Kanazawa, Japan, Nov., 2017, Nov. 2017
2017 Proc. IEEE Asian Test Symposium (ATS), Taipei, Taiwan, Nov., 2017 (EI, IEEE) , Nov. 2017" target='_blank'>P. M. Law, C.-W. Wu, H.-C. Hong, and L.-Y. Lin,  " An enhanced boundary scan architecture for inter-die interconnect leakage measurement in 2.5D and 3D packages," Proc. IEEE Asian Test Symposium (ATS), Taipei, Taiwan, Nov., 2017 (EI, IEEE) , Nov. 2017
2017 presented in Progress In Electromagnetics Research Symposium (PIERS), St. Petersburg, Russia, May, 2017, May. 2017" target='_blank'>H.-C. Hong, " Analysis for the Optimal Designs of Two-coil Inductive Coupling Wireless Power Transfer Systems," presented in Progress In Electromagnetics Research Symposium (PIERS), St. Petersburg, Russia, May, 2017, May. 2017
2017  Proc. the 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), Kaohsiung, Taiwan, Jun., 2017, Apr. 2017" target='_blank'>Y. Chiu, H.-C. Hong, and C.-M. Chang, " Three-axis CMOS MEMS inductive accelerometer with novel Z-axis sensing scheme," Proc. the 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), Kaohsiung, Taiwan, Jun., 2017, Apr. 2017
2017 Proc. IEEE International Conference on Applied System Innovation (CASI), Sapporo, Japan, May, 2017 (EI, IEEE), Apr. 2017" target='_blank'>H.-C. Hong, L.-Y. Lin, and C.-J. Liu, " Design of an On-Scribe-Line 12-bit Dual-Slope ADC for Wafer Acceptance Test," Proc. IEEE International Conference on Applied System Innovation (CASI), Sapporo, Japan, May, 2017 (EI, IEEE), Apr. 2017
2016 IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE), Nov. 2017" target='_blank'>Y. Chiu, H.-C. Hong, and C.-W. Lin, "Inductive CMOS MEMS accelerometer with integrated variable inductors," IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE), Nov. 2017
2016 Proc. the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), Slovakia, April, 2016 (IEEE) , Apr. 2017" target='_blank'>H.-Y. Huang, S.-Z. Yen, J.-H. Chen, H.-C. Hong, K.-H. Cheng, " Low-Voltage Indoor Energy Harvesting Using Photovoltaic Cell," Proc. the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), Slovakia, April, 2016 (IEEE) , Apr. 2017
2016 Proc. Asia-Pacific Conference of Transducers and Micro-Nano Technology, APCOT 2016, Japan (2016)  , Jun. 2016" target='_blank'>Y. Chiu, H.-C. Hong, and W.-H. Hsu, "Effect of asymmetric structures on output enhancement in electromagnetic energy harvesters fabricated by rigid-flex PCB technology," Proc. Asia-Pacific Conference of Transducers and Micro-Nano Technology, APCOT 2016, Japan (2016)  , Jun. 2016
2015 Proc. IEEE International Symposium on Next-Generation Electronics (ISNE), 2015, pp. 1-4 (IEEE), Nov. 2017" target='_blank'>C.-Y. Chiang, L.-Y. Lin, H.-C. Hong, "Design and experimental results of a wireless power receiver for the water pollution detection system," Proc. IEEE International Symposium on Next-Generation Electronics (ISNE), 2015, pp. 1-4 (IEEE), Nov. 2017
2015 C.-Y. Chiang, H.-C. Hong, J.-C. Chiao, L.-Y. Lin, and Y. Chiu, “A wirelessly-powered implantable stimulator for relieving gastroparesis symptoms,” in Proc. the 4th International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Fukuoka, Japan, Dec., 2015 , Apr. 2017
2015 IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE), Jul. 2016" target='_blank'>Y. Chiu, H.-C. Hong, and C.-W. Lin, "Inductive CMOS MEMS accelerometer with integrated variable inductors," IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE), Jul. 2016
2014 in Proc. IEEE Asian Test Symposium, HangZhou, November, 2014, pp. 63-67, (IEEE), Apr. 2017" target='_blank'>S.-F. Hung, L.-Y. Lin, and H.-C. Hong, "A Cost-Effective Stimulus Generator for Battery Channel Characterization in Electric Vehicles," in Proc. IEEE Asian Test Symposium, HangZhou, November, 2014, pp. 63-67, (IEEE), Apr. 2017
2014 in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Melbourne, Australia, June, 2014, pp. 1134-1137 (IEEE) , Apr. 2017" target='_blank'>Y.-W. Chen and H.-C. Hong, " A Fast-Locking All-Digital Phase Locked Loop in 90nm CMOS for Gigascale Systems," in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Melbourne, Australia, June, 2014, pp. 1134-1137 (IEEE) , Apr. 2017
2014 in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014 (IEEE) , Apr. 2017" target='_blank'>R.-Z. Kuo and H.-C. Hong, "A 17-nW, 0.5V, 500S/s, Rail-to-Rail SAR ADC with 8.1 Effective Number of Bits", in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014 (IEEE) , Apr. 2017
2014 in Proc. IEEE Sensors Conference, Valencia, Spain, November, 2014 , pp. 209-212 (IEEE), Apr. 2017" target='_blank'>H.-C. Hong, Y.-T. Chen, S.-F. Hung, C.-C. Wu, and Y. Chiu, "A cost-effective angle demodulator IC for path matched differential interferometry based sensors," in Proc. IEEE Sensors Conference, Valencia, Spain, November, 2014 , pp. 209-212 (IEEE), Apr. 2017
2013 L.-Y. Lin and H.-C. Hong, “Design of a fault-injectable Fleischer-Laker switched-capacitor biquad for verifying the static linear behavior fault model,” in Proc. International Asian Test Symposium (ATS), Yi-Lan, Nov., 2013 (EI, IEEE) , pp. 62-66, Apr. 2017
2013 R.-Z. Kuo and H.-C. Hong, “Design of an ultra-low power SAR ADC for biomedical applications,” in Proc. the 2nd International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Tokyo, Japan, Oct., 2013, Apr. 2017
2013 in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), Tokyo, Japan, March, 2013, pp. 1-4, Apr. 2017" target='_blank'>C.-C. Chang and H.-C. Hong, "A 5MS/s Fully-Differential SAR ADC with an ENOB of 8.5," in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), Tokyo, Japan, March, 2013, pp. 1-4, Apr. 2017
2012 Proc. Power MEMS, Atlanta, Dec. 2012, pp. 149-152, Apr. 2017" target='_blank'>Y. Chiu, R. P. Bargayo, and H.-C. Hong, " Stacked electret energy harvesting system fabricated with folded flexible printed circuit board," Proc. Power MEMS, Atlanta, Dec. 2012, pp. 149-152, Apr. 2017
2012 in Proceedings of the 9th International SoC Design Conference (ISOCC), Jeju, Korea, Nov., 2012, pp.179-184 (IEEE), Apr. 2017" target='_blank'>S.-F.. Hung, L.-Y. Lin, and H.-C. Hong, "Testing the Fleischer-Laker switched-capacitor biquad using the diagnosis-after-test procedure,” in Proceedings of the 9th International SoC Design Conference (ISOCC), Jeju, Korea, Nov., 2012, pp.179-184 (IEEE), Apr. 2017
2012 Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu “CMOS-MEMS accelerometer with differential LC-tank oscillators,” Proc. IEEE Sensors Conference, October, 2012, pp. 1-4 (IEEE), Jul. 2016
2012 in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE), Nov. 2014" target='_blank'>pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)' target='_blank'>Shao-Fung Hung, Long-Yi Lin, and Hao-Chiao Hong, "A study on the design of a testable Fleischer-Laker switched-capacitor biquad," in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE), Nov. 2014
2012 Long-Yi Lin, Shao-Feng Hung, and Hao-Chiao Hong, “A Test Procedure to Test for the Capacitor Ratios of a Switched-Capacitor Biquad,” n the 6th VLSI Test Technology Workshop (VTTW), July, 2012, Nov. 2013
2011 Shao-Fung Hung and Hao-Chiao Hong, “Design of a Design-for-Digital-Testability Third-Order Sigma-Delta Modulator,” in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11) , pp.110-113, Santa Barbara, California, May, 2011 (IEEE), Nov. 2014
2011 in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE), Nov. 2014" target='_blank'>Shao-Fung Hung and Hao-Chiao Hong, "A Fully Integrated Built-in Self-Test Sigma-Delta ADC on a Wireless Test Platform," in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE), Nov. 2014
2011 Kin-Man Lei and Hao-Chiao Hong, “A 12-bit 25MS/s Asynchronous SAR ADC,” in Proceedings of the 22nd VLSI Design/CAD Symposium, August, 2011, Nov. 2013
2010 Rong-Zhou Kuo and Hao-Chiao Hong “An Ultra-low Power Rail-to-Rail Successive Approximation ADC with an 8.3 ENOB,” in Proceedings of the 21st VLSI Design/CAD Symposium, pp.687-690, Aug., 2010, Nov. 2013
2009 Chen-Kang Ho and Hao-Chiao Hong, “A 6-GS/s, 6-bit, At-speed Testable ADC and DAC Pair in 0.13mm CMOS,” in Proceedings of the International Symposium on VLSI Design, Automation, and Test (VLSI-DAT), pp.207-210, April, 2009 (Granted the best paper award, symposium acceptance rate=30%, 53/178) (IEEE), Nov. 2014
2009 Shao-Fung Hung, Hao-Chiao Hong, and Sheng-Chaun Liang “A Low-Cost Output Response Analyzer for the Built-in-Self-Test S-D Modulator Based on the Controlled Sine Wave Fitting Method,” in Proceedings of the IEEE Asian Test Symposium (ATS), pp.385-388, November, 2009 (IEEE), Nov. 2014
2008 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A cost effective BIST second-order S-D modulator,” in Proceedings of the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), pp.314-319, April, 2008 (IEEE), Nov. 2014
2007 Sheng-Chaun Liang, Ding-Jyun Huang, Chen-Kang Ho, and Hao-Chiao Hong, “10 GSamples/s, 4-bit, 1.2V, Design-for-Testability ADC and DAC in 0.13um CMOS Technology,” in Proceedings of the IEEE Asian Solid-State Circuits Conference (A-SSCC), pp. 416-419, October, 2007, (acceptance rate=32%, 107/332) (IEEE), Nov. 2014
2007 Tsung-Yin Hsieh and Hao-Chiao Hong, “A 1.76uW, 0.9V, 8-bit successive approximation register ADC with fully-differential input capability,” in Proceedings of the 18th VLSI Design/CAD Symposium, pp. 123-127, August, 2007, Nov. 2013
2006 Hao-Chiao Hong and Sheng-Chaun Liang, “A cost effective output response analyzer for S-D modulation based BIST systems,” in Proceedings of the 15th IEEE Asian Test Symposium (ATS), pp.255-261, Nov. 2006. (IEEE), Nov. 2014
2005 Hao-Chiao Hong, “Improving the behavioral simulation accuracy of the design-for-digital-testability second-order S-D modulator,” in the 11th International Mixed-Signal Testing Workshop (IMSTW), Canne, June, 2005 (IEEE), Nov. 2014
2004 Hao-Chiao Hong, Cheng-Wen Wu, and Kwang-Ting Cheng, “A S-D modulation based BIST system with a wide bandwidth fifth-order analog response extractor for diagnosis purpose,” Proceedings of the 13th IEEE Asian Test Symposium (ATS), pp. 62-67, KenTing, November, 2004 (IEEE), Nov. 2014
2004 Hao-Chiao Hong, “Design-for-digital-testability 30MHz second-order S-D modulator,” in Proceedings of the IEEE 2004 Custom Integrated Circuit Conference (CICC) , pp. 211-214, October, 2004 (IEEE), Nov. 2014
2002 Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, and Cheng-Wen Wu, “On-chip analog response extraction with 1-bit Sigma-Delta modulators,” in Proceedings of the 11th IEEE Asian Test Symposium (ATS), pp. 49-54, Nov., 2002 (IEEE), Nov. 2014
1997 Hao-Chiao Hong, Bin-Hong Lin, and Cheng-Wen Wu, “Design and Analysis of multiple-bit Sigma-Delta modulator,” in Proceedings of the IEEE Asia and South Pacific Design Automation Conference (ASPDAC), pp. 419-424, Jan., 1997 (IEEE), Nov. 2014
1997 Hao-Chiao Hong and Cheng-Wen Wu, “Optimal integrator gain design of extended MASH high-order S-D modulator,” in Proceedings of the 8th VLSI Design/CAD Symposium, pp. 333-336, Aug., 1997 , Aug. 1997
1996 Hao-Chiao Hong, Shao-Huey Shieh, and Cheng-Wen Wu, “Optimization of the spanning tree carry look-ahead adder,” in Proceedings of the 7th VLSI/CAD symposium, pp. 253-256, Aug., 1996 , Nov. 2014
計畫類別 年度 計畫名稱 參與人 職稱/擔任之工作 計畫期間 補助/委託或合作機構
研究計畫 2015 永續型pH值感測微系統-子計畫三:永續型pH值感測微系統之無線傳能 與資料傳輸電路設計技術(II, III) 洪浩喬 主持人 2015.08 ~ 2017.07 科技部
研究計畫 2014 永續型pH值感測微系統-子計畫三:永續型pH值感測微系統之無線傳能 與資料傳輸電路設計技術(I) 洪浩喬 主持人 2014.08 ~ 2015.07 科技部
產學合作計畫 2014 Wireless WAT 洪浩喬 主持人 2014.05 ~ 2015.05 台積電
研究計畫 2013 具通訊與容錯功能之智慧車用電池模組管理系統-子計畫三:具電池通 訊通道特性自我測試功能的電池通訊類比前端積體電路設計 (III) 洪浩喬 主持人 2013.08 ~ 2014.07 科技部
研究計畫 2012 具通訊與容錯功能之智慧車用電池模組管理系統-子計畫四:具電池通訊通道特性自我測試功能的電池通訊類比前端積體電路設計(II) 洪浩喬 計畫主持人 2012.07 ~ 2013.08 國科會
研究計畫 2012 微型慣性感測元件之訊號處理技術與最佳化設計研究(II)-子計畫二:光學式微型慣性感測元件的同調干涉訊號處理晶片設計研究 洪浩喬 計畫主持人 2012.01 ~ 2012.12 國科會
研究計畫 2011 具通訊與容錯功能之智慧車用電池模組管理系統-子計畫四:具電池通訊通道特性自我測試功能的電池通訊類比前端積體電路設計(I) 洪浩喬 子計畫四主持人 2011.08 ~ 2012.07 國科會
研究計畫 2010 具通信功能之車用功率系統晶片-子計畫一:車用電源線通訊系統之類比前端積體電路設計(3/3) 洪浩喬 子計畫一主持人 2011.07 ~ 2012.08 國科會
研究計畫 2009 具通信功能之車用功率系統晶片-子計畫一:車用電源線通訊系統之類比前端積體電路設計(2/3) 洪浩喬 子計畫一主持人 2009.08 ~ 2010.07 國科會
研究計畫 2008 具通信功能之車用功率系統晶片-子計畫一:車用電源線通訊系統之類比前端積體電路設計(1/3) 洪浩喬 子計畫一主持人 2008.08 ~ 2009.07 國科會
研究計畫 2008 適用於使用開路放大器設計之低功率管線式類比數位轉換器的數位校正方法 洪浩喬 主持人 2008.01 ~ 2012.08 國科會
研究計畫 2007 適用於心電圖應用之微瓦級1伏十位元類比數位轉換器設計 洪浩喬 主持人 2007.08 ~ 2008.07 國科會
產學合作計畫 2005 Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies (PI: Prof. Cheng-Wen Wu of National Tsinghua University) 洪浩喬 Subproject A Co-P.I. 2005.12 ~ 2009.11 經濟部
產學合作計畫 2005 學界科專: 晶片系統傳輸鏈技術開發三年計畫 蘇朝琴、鄭國興、洪浩喬 分項計畫名稱:晶片系統內傳輸鏈結-實體層設計及內建測試共同主持人 2005.03 ~ 2008.12 經濟部
發表日期 專利名稱
2016/06/11 Hao-Chiao Hong, Yu-Che Chen, and Shao-Feng Hung, "使用週期性重置積分之角度解調變裝置及其方法" ROC patent I538408, issued on Jun. 11, 2016
2015/09/21 Hao-Chiao Hong, "超大型電晶體陣列式電氣參數測試裝置" ROC patent I509267, issued on Sep. 21, 2015 
2015/09/21 Hao-Chiao Hong and Tsung-Yin Hsieh, "估測逐次漸近類比數位轉換器中電容權重誤差之方法與其應用於校正該逐次漸進類比數位轉換器,"  ROC patent I501562, issued on September 21, 2015 
2015/06/02 Hao-Chiao Hong, Yu-Che Chen, and Shao-Feng Hung, "PERIODICALLY RESETTING INTEGRATION ANGLE DEMODULATION DEVICE AND METHOD USING THE SAME" USA patent US9,048,785B2 issued on Jun. 2, 2015 
2014/12/09 Hao-Chiao Hong and Tsung-Yin Hsieh, "Method for estimating capacitance weight errors and successive approximation analog-to-digital converter using the same," US patent number 8,907,826B2, issued on December 9, 2014
2014/10/11 Hao-Chiao Hong and Yu-Shian Wang, "數位類比轉換電路及其權重誤差估測與校正方法," ROC patent I456907, issued on Oct. 11, 2014
2014/09/16 Hao-Chiao Hong and Yu-Shian Wang, "DIGITAL-TO-ANALOG CONVERTER (DAC) CIRCUIT AND WEIGHT ERROR ESTIMATION/CALIBRATION METHOD THEREOF," USA patent US 8,836,554B2 issued on Sep. 16, 2014
2012/04/01 Hao-Chiao Hong, “利用數位激發訊號來準確測量放大器開路增益之裝置,” ROC patent  I361900 issued on Apr. , 2012.
2012/02/07 Hao-Chiao Hong, “Device for accurately measuring amplifier’s open-loop gain with digital stimuli,” U.S.A. patent US8,112,236B2, issued on Feb. 7, 2012.
2011/11/02 Hao-Chiao Hong, “利用數字激發訊號來準確測量放大器開路增益之裝置,” 中國大陸專利, PRC patent ZL 200810002352.5 issued on 2011/11/02 有效期限 2008/01/15- 2028/01/15
2007/06/26 Hao-Chiao Hong, “A reconfigurable switched-capacitor input circuit with digital stimulus acceptability for analog tests,” U.S.A. patent US7,236,116B2, Jun. 26, 2007.
2007/01/01 Hao-Chiao Hong, “於類比測試中可接收數位測試激發訊號之可重新規劃切換電容輸入電路” ROC patent number I270254, issued on January, 2007
2005/12/06 Hao-Chiao Hong, “Bandgap reference voltage generator with a low-cost, low-power, fast start-up circuit,” U.S.A. patent 6,972,550, Dec. 6, 2005
1996/05/01 Hao-Chiao Hong, “高階積差式調變器” ROC patent number 077991, issued on May 1, 1996
年度 名稱 發表日期 全部作者
2013 Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012.">
Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012.
2013-06-05
2012 Hao-Chiao Hong, Shao-Feng Hung, Chih-Chien Chang, Yu-Shian Wang, and Kin-Man Lei, “Design of a power line communication SoC for automobiles, Subproject- I: Design of the analog front end IC for power line communication on automobiles” Joint Research Project NSC 99-2220-E-009-023- final report, National Science Council, Taiwan, R.O.C., August, 2011 2012-07-08
2011 邱俊誠, 洪浩喬, 及黃鼎鈞, "Design of the MEMS Gyro driver,"工研院系統與航太技術發展中心委託技術開發合作案, Dec., 2004. 2011-08-01
2011 Hao-Chiao Hong, “Ultra-Low Power and Digitally Testable Analog-to-Digital Converter.” Research Project NSC93-2215-E009-050 final report, National Science Council, Taiwan, R.O.C., August, 2005. 2011-08-01
2011 Hao-Chiao Hong, Ding-Jyun Huang, and Chen-Kang Ho, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC.” Joint Research Project 94-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2006. 2011-08-01
2011 Hao-Chiao Hong and Guo-Ming Lee, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC94-2215-E009-081 final report, National Science Council, Taiwan, R.O.C., August, 2006. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Hong-Chin Song, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for     Modulators ” Joint Research Project 94-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2006. 2011-08-01
2011 Hao-Chiao Hong, Chen-Kang Ho, and Yung-Shun Chen, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 95-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2007. 2011-08-01
2011 Hao-Chiao Hong, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC95-2221-E009-344 final report, National Science Council, Taiwan, R.O.C., August, 2007. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Fang-Yi Su, “ Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 95-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2007. 2011-08-01
2011 Hao-Chiao Hong, Yung-Shun Chen, and Wai-Jay Fang “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 96-EC-17-A-01-S1-037 final report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 96-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “A 1-V, 10-bit micro-Watt ADC for ECG applications” Research Project NSC 96-2221-E-009-232- final report, National Science Council, Taiwan, R.O.C., August, 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 97-EC-17-A-01-S1-002 final report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Tsung-Yin Hsieh, Zhi-Jian Chang, and Wai-Jay Fang “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC97-2220-E-009 -048 -) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 2011-08-01
2011 Hao-Chiao Hong, Ming-Ta Ho, and Kun-Chih Wu,, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 2011-08-01
2011 Hao-Chiao Hong, Shao-Feng Hung, Zhi-Jian Chang, Yu-Shian Wang, and Kin-Man Lei “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC98-2220-E-009 -036 -) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 2011-08-01
2011 Hao-Chiao Hong, Ming-Ta Ho, Kun-Chih Wu, and Yi-Wey Chen “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 2011-08-01
國家 學校名稱 系所 學位 期間
台灣 清華大學 電機系 博士 ~ 2003.06
台灣 清華大學 電機系 碩士 1990.09 ~ 1992.06
台灣 清華大學 電機系 學士 1986.09 ~ 1990.06
服務機關名稱 單位 職務 期間
交通大學 電機工程學系 教授 2012.08 ~ 迄今
交通大學 電機工程學系 副教授 2009.03 ~ 2012.07
交通大學 電機與控制工程學系 副教授 2008.08 ~ 2009.03
交通大學 電機與控制工程學系 助理教授 2004.02 ~ 2008.08
積丞科技 類比矽智產部 資深經理 2001.08 ~ 2004.01
台積電 設計服務處 主任工程師 1997.06 ~ 2001.06
類別 年度 獎項名稱 頒獎單位
校內榮譽事項 2018 優良教學獎 交通大學電機資訊學院在職專班
校內榮譽事項 2018 電機學院優良教學獎 交通大學電機學院
校外榮譽事項 2017 指導學生張豈銘獲2017 CIC 晶片製作成果發表會 微機電組 優等設計獎(與邱一教授同獲) 國家實驗院晶片設計中心
校內榮譽事項 2017 電機學院傑出教學獎 交通大學電機學院
校外榮譽事項 2016 指導學生林龍逸獲最佳論文獎 The 10th VLSI Test Technology Workshop
校內榮譽事項 2016 電機學院傑出教學獎 交通大學電機學院
校內榮譽事項 2016 電機資訊學院傑出教學獎 電機資訊學院
校外榮譽事項 2013 指導學生吳柏奇榮獲2013 CIC 晶片製作成果發表會 微機電組 特優獎(與邱一教授同獲) 國家晶片系統設計中心
校外榮譽事項 2012 指導學生洪紹峰同學榮獲2012金矽獎評審團鑽石大賞 旺宏電子
校外榮譽事項 2012 指導學生洪紹峰榮獲2012 CIC 晶片製作成果發表會 類比電路組 優良設計獎 國家晶片系統設計中心
校外榮譽事項 2010 2010教育部前瞻系統晶片設計人才培育先導型計畫教材優等(與邱一教授同獲) 教育部
校外榮譽事項 2010 指導學生洪紹峰榮獲2010 CIC 晶片製作成果發表會 類比電路組 佳作設計獎 國家晶片系統設計中心
校外榮譽事項 2010 指導學生何振綱榮獲2009 International Symposium on VLSI Design, Automation and Test Best Paper Award International VLSI-DAT Symposium
校外榮譽事項 2009 指導學生陳永順、方韋傑榮獲2009CIC晶片製作成果發表會優良設計獎(類比) 國家晶片系統設計中心
校外榮譽事項 2009 指導學生謝宗殷、郭榮洲榮獲2009CIC晶片製作成果發表會佳作設計獎(類比) 國家晶片系統設計中心
校外榮譽事項 2008 指導學生何振綱、陳永順榮獲國家晶片系統設計中心 2008 CIC晶片製作成果發表會 佳作設計獎 國家晶片系統設計中心
校外榮譽事項 2007 指導研究生黃鼎鈞、何振綱獲2007年CIC優良晶片設計類比組佳作 國家晶片系統設計中心
校外榮譽事項 2007 指導研究生李國銘獲2007年CIC優良晶片設計類比組佳作 國家晶片系統設計中心
校外榮譽事項 2006 指導學生黃鼎鈞、何振綱榮獲全國大學院校IC設計競賽類比電路設計(不分組) 優等 教育部
校內榮譽事項 2005 94學年第一學期績優導師奨 交通大學
年度 月份 著作名稱 其他
2012 4 Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012. 技術報告
2011 8 Hao-Chiao Hong, Shao-Feng Hung, Chih-Chien Chang, Yu-Shian Wang, and Kin-Man Lei, “Design of a power line communication SoC for automobiles, Subproject- I: Design of the analog front end IC for power line communication on automobiles” Joint Research Project NSC 99-2220-E-009-023- final report, National Science Council, Taiwan, R.O.C., August, 2011 技術報告
2010 8 Hao-Chiao Hong, Shao-Feng Hung, Zhi-Jian Chang, Yu-Shian Wang, and Kin-Man Lei “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC98-2220-E-009 -036 -) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 技術報告
2010 8 Hao-Chiao Hong, Ming-Ta Ho, Kun-Chih Wu, and Yi-Wey Chen “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 技術報告
2009 8 Hao-Chiao Hong, Sheng-Chaun Liang, Tsung-Yin Hsieh, Zhi-Jian Chang, and Wai-Jay Fang “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC97-2220-E-009 -048 -) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 技術報告
2009 8 Hao-Chiao Hong, Ming-Ta Ho, and Kun-Chih Wu,, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 技術報告
2009 12 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 97-EC-17-A-01-S1-002 final report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2009. 技術報告
2008 8 Hao-Chiao Hong, Sheng-Chaun Liang, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “A 1-V, 10-bit micro-Watt ADC for ECG applications” Research Project NSC 96-2221-E-009-232- final report, National Science Council, Taiwan, R.O.C., August, 2008. 技術報告
2008 3 Hao-Chiao Hong, Yung-Shun Chen, and Wai-Jay Fang “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 96-EC-17-A-01-S1-037 final report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2008. 技術報告
2008 12 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 96-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2008. 技術報告
2007 8 Hao-Chiao Hong, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC95-2221-E009-344 final report, National Science Council, Taiwan, R.O.C., August, 2007. 技術報告
2007 3 Hao-Chiao Hong, Chen-Kang Ho, and Yung-Shun Chen, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 95-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2007. 技術報告
2007 12 Hao-Chiao Hong, Sheng-Chaun Liang, Fang-Yi Su, “ Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 95-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2007. 技術報告
2006 8 Hao-Chiao Hong and Guo-Ming Lee, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC94-2215-E009-081 final report, National Science Council, Taiwan, R.O.C., August, 2006. 技術報告
2006 3 Hao-Chiao Hong, Ding-Jyun Huang, and Chen-Kang Ho, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC.” Joint Research Project 94-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2006. 技術報告
2006 12 Hao-Chiao Hong, Sheng-Chaun Liang, Hong-Chin Song, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for     Modulators ” Joint Research Project 94-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2006. 技術報告
2005 8 Hao-Chiao Hong, “Ultra-Low Power and Digitally Testable Analog-to-Digital Converter.” Research Project NSC93-2215-E009-050 final report, National Science Council, Taiwan, R.O.C., August, 2005. 技術報告
2004 12 邱俊誠, 洪浩喬, 及黃鼎鈞, "Design of the MEMS Gyro driver,"工研院系統與航太技術發展中心委託技術開發合作案, Dec., 2004. 技術報告