洪浩乔
职称 教授
姓名 洪浩乔
电子邮件 hchong@nycu.edu.tw
联络电话 03-5712121 ext54375
网站 http://amsdft.cn.nctu.edu.tw/
研究专长 Training methods and software modeling of artificial neural networks, analog computing in memory circuit design, Mixed-signal circuit design including ADC, DAC, audio codec, PLL, filters, wireless power, power management, high speed serial interface, and sensor interfaces; design-for-testability (DfT), built-in self-test (BIST) and calibration techniques for mixed-signal circuits.
授课领域 Analog IC Design
实验室 前瞻混合讯号电路暨可测试设计实验室
自传
Hao-Chiao Hong received the B.S., M.S., and Ph.D. degrees in Electrical Engineering from National Tsing-Hua University, Taiwan, in 1990, 1992, and 2003, respectively. From 1997 to 2001, he was with Taiwan Semiconductor Manufacturing Company (TSMC) where he developed mixed-signal IPs for customers and process vehicles. He joined Intellectual Property Library Company, HsinChu, Taiwan, as the senior manager of the Analog IP Department in Aug. 2001. He has been with National Chiao Tung University (NCTU), Hsinchu, Taiwan since Feb., 2004 where he is currently a professor of the Electrical and Computer Engineering department.

His main research interests include the training method and software modeling of artificial neural networks, analog computing in memory circuit design, the design-for-testability (DFT), built-in self-test (BIST), and calibration techniques for mixed-signal systems, and high performance mixed-signal circuit design. He received the Best Paper Awards from the 2009 International Symposium on VLSI Design, Automation & Test (VLSI-DAT) and 2016 VLSI Test Technology Workshop.

Dr. Hong served as the executive secretary of the Mixed-signal and RF Consortium of Ministry of Education, Taiwan from 2006 to 2008, and the executive secretary of the Heterogeneous Integration Consortium of Ministry of Education, Taiwan, from 2008 to 2009. He also served as the general chair of the sixth VLSI Test Technology Workshop (VTTW) in 2012, and the program chair of the fifth VTTW in 2011. He is a life member of Taiwan IC Design (TICD) Association and a life member of VLSI Test Technology Forum (VTTF), Taiwan.
年度 论文名称
2020 Hao-Chiao Hong and Chih-Ko Yang, Interleaved write scheme for improving sequential write throughput of multi-chip MLC NAND Flash memory systems, IEEE Transactions on Circuits and Systems I: Regular Papers, 67, 12, pp4946-4959" target='_blank'>Hao-Chiao Hong and Chih-Ko Yang, Interleaved write scheme for improving sequential write throughput of multi-chip MLC NAND Flash memory systems, IEEE Transactions on Circuits and Systems I: Regular Papers, 67, 12, pp4946-4959
2020 Chi-Yi Lo and Hao-Chiao Hong, A 0.9 pJ/b, reference clock free, delay-based, all-digital coherent BPSK demodulator, IEEE Solid-State Circuits Letters, 3, pp498-501" target='_blank'>Chi-Yi Lo and Hao-Chiao Hong, A 0.9 pJ/b, reference clock free, delay-based, all-digital coherent BPSK demodulator, IEEE Solid-State Circuits Letters, 3, pp498-501
2019  Micromachines, Vol.10, No.11, pp. Nov., 2019. (SCI)" target='_blank'>Yi Chiu, Hsuan-Wu Liu,  and Hao-Chiao Hong, "A Robust Fully Integrated Digital-Output Inductive CMOS-MEMS Accelerometer with Improved Inductor Quality Factor," Micromachines, Vol.10, No.11, pp. Nov., 2019. (SCI)
2019 IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 9, pp. 3467-3479, Sep., 2019 (SCI)" target='_blank'>Hao-Chiao Hong and Long-Yi Lin, "Accurate and Fast On-Wafer Test Circuitry for Device Array Characterization in Wafer Acceptance Test," IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 9, pp. 3467-3479, Sep., 2019 (SCI)
2019 IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 5, pp. 1840-1852, May, 2019 (SCI)." target='_blank'>Hao-Chiao Hong, Long-Yi Lin, and Yi Chiu "Design of a 0.20-V to 0.25-V, Sub-nW, Rail-to-Rail, 10-bit SAR ADC for Self-Sustainable IoT Applications," IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 66, No 5, pp. 1840-1852, May, 2019 (SCI).
2018 Micromachines, Vol. 9, No.6, pp. 1-15, Jun., 2018 (SCI)." target='_blank'>Yi Chiu and Hao-Chiao Hong, "Rigid-Flex PCB Technology with Embedded Fluidic Cavities and Its Application in Electromagnetic Energy Harvesters," (Regular paper) Micromachines, Vol. 9, No.6, pp. 1-15, Jun., 2018 (SCI).
2018 J. Phys.: Conf. Ser., 1052, 012078, Jan. 2018" target='_blank'>Yi Chiu and Hao-Chiao Hong, "Electromagnetic energy harvester with embedded ferrofluid in PCB technology,"  J. Phys.: Conf. Ser., 1052, 012078, Jan. 2018
2016 Smart Materials and Structures, Vol. 25, No.12, pp. 1-8, Dec., 2016 (SCI) " target='_blank'>Yi Chiu, Hao-Chiao Hong, and Wei-Hung Hsu, "Wideband vibrational electromagnetic energy harvesters with nonlinear polyimide springs based on rigid-flex printed circuit boards technology," Smart Materials and Structures, Vol. 25, No.12, pp. 1-8, Dec., 2016 (SCI)
2016 IEEE Sensors Journal, Vol. 16, No. 12, pp. 4856- 4865, Jun., 2016 (SCI)" target='_blank'>Hao-Chiao Hong, Yun-Tse Chen, Shao-Feng Hung, Chin-Cheng Wu, and Yi Chiu, "An angle demodulator IC using periodically reset integration for the path matched differential interferometry based sensors," (Regular paper) IEEE Sensors Journal, Vol. 16, No. 12, pp. 4856- 4865, Jun., 2016 (SCI)
2015 J. Phys.: Conf. Ser., Vol. 660, No. 1, pp. 12083-12086, Jan. 2015" target='_blank'>Yi Chiu, Hao-Chiao Hong, and W.-H. Hsu, "Nonlinear electromagnetic energy harvesters fabricated by rigid-flex printed circuit board technology," J. Phys.: Conf. Ser., Vol. 660, No. 1, pp. 12083-12086, Jan. 2015
2014 IEEE Transactions on Instrumentation and Measurement, Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI)" target='_blank'>Shao-Feng Hung and Hao-Chiao Hong, "A Fully Integrated BIST ΔΣ ADC Using the In-Phase and Quadrature Waves Fitting Procedure," (Regular paper) IEEE Transactions on Instrumentation and Measurement, Vol. 63, No. 12, pp. 2750- 2760, December, 2014 (SCI)
2014 IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6, pp. 1238–1247, June, 2014 (SCI) " target='_blank'>Hao-Chiao Hong, Yung-Shun Chen, and Wei-Chieh Fang,"14 GSps four-bit noninterleaved data converter pair in 90 nm CMOS with built-in eye diagram testability," IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 22, No. 6, pp. 1238–1247, June, 2014 (SCI)
2014 Sensors and Materials, Vol. 26, No. 2, pp. 95–108, February, 2014 (SCI)" target='_blank'>Yi Chiu, Tsung-Chih Huang, and Hao-Chiao Hong, "A Three-Axis Single-Proof-Mass CMOS-MEMS Piezoresistive Accelerometer with Frequency Output," Sensors and Materials, Vol. 26, No. 2, pp. 95–108, February, 2014 (SCI)
2013 IEEE Journal of Microelectromechanical Systems, Vol. 22, No.6, pp. 1285-1295, Dec., 2013. (SCI)" target='_blank'>Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu, "Development and Characterization of a CMOS-MEMS Accelerometer with Differential LC-Tank Oscillators," IEEE Journal of Microelectromechanical Systems, Vol. 22, No.6, pp. 1285-1295, Dec., 2013. (SCI)
2012 Hao-Chiao Hong, “A Static Linear Behavior Analog Fault Model for Switched-Capacitor Circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), Vol. 31, No.4, pp. 597-609, Apr., 2012. (SCI)
2012 Shao-Feng Hung and Hao-Chiao Hong, “Experimental Results of Testing a BIST Σ–Δ ADC on the HOY Wireless Test Platform,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 28, Issue 5, pp. 571-584, Nov. 2012, DOI:10.1007/s10836-012-5302-7 (SCI)
2011 Sheng-Chaun Liang and Hao-Chiao Hong, “A digitally testable Σ-Δ modulator using the decorrelating Design-for-digital-testability scheme,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 19, No. 3, pp. 503-507, Mar., 2011. (SCI)
2010 Hao-Chiao Hong, Fang-Yi Su, and Shao-Feng Hung, “A fully integrated built-in-self-test Σ-Δ ADC based on the modified controlled sine wave fitting procedure,” IEEE Transactions on Instrumentation and Measurement (TIM), Vol. 59, No. 9, pp. 2334-2344, Sept., 2010. (SCI)
2009 Hao-Chiao Hong and Sheng-Chaun Liang, “A decorrelating design-for-digital- testability scheme for S-D modulators,” IEEE Transactions on Circuits and Systems I: Regular Papers (TCAS-I), Vol. 56, No. 1, pp. 60-73, Jan., 2009 (SCI)
2009 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A built-in-self-test S-D ADC prototype,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 25, No. 2-3, pp. 145-156, Jun., 2009 (SCI)
2007 Hao-Chiao Hong and Guo-Ming Lee, “A 65 fJ/conversion-step 0.9-V 200-KS/s rail-to-rail 8-bit successive approximation ADC,” IEEE Journal of Solid-State Circuits (JSSC), Vol. 42, No. 10, pp. 2161-2168, Oct., 2007 (SCI)
2007 Hao-Chiao Hong, “A design-for-digital-testability circuit structure for Sigma-Delta modulators,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol. 15, No. 12, pp. 1341-1350, Dec., 2007 (SCI)
2007 Hao-Chiao Hong, “A Fully-settled linear behavior plus noise model for evaluating the digital stimuli of the design-for-digital-testability Sigma-Delta modulators,” Journal of Electronic Testing: Theory and Applications (JETTA), Vol. 23, pp.527-538, Dec., 2007 (SCI)
2004 Hao-Chiao Hong and Cheng-Wen Wu, “Selection of high-order analog response extractor for S-D modulation based analog built-in self-test applications,” International Journal of Electrical Engineering, Vol. 11, No.2, pp.103-115, May, 2004.
2003 Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, Cheng-Wen Wu, and Ding-Ming Kwai, “Practical considerations in applying Sigma-Delta modulation-based analog BIST to sampled-data systems,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing (TCAS-II), Vol. 50, No. 9, pp. 553-566, Sep., 2003 (SCI)
年度 论文名称
2019 in Proc. IEEE Sensors Conference, Montreal, Canada, Oct., 2019, pp. 1-4 (IEEE)" target='_blank'>Y. Chiu, Y.-Z. Chen, C.-C. Hsieh, and H.-C. Hong, "A Wireless Gauge Pressure Sensor with Enhanced Sensitivity Fabricated by Flexible PCB Technology for Intracranial Pressure Sensing," in Proc. IEEE Sensors Conference, Montreal, Canada, Oct., 2019, pp. 1-4 (IEEE)
2019 presented in IEEE International Symposium on Integrated Circuits and Systems (ISICAS), Venice, Italy, Aug., 2019" target='_blank'>H.-C. Hong and L.-Y. Lin, "Accurate and Fast On-Wafer Test Circuitry for Device Array Characterization in Wafer Acceptance Test," presented in IEEE International Symposium on Integrated Circuits and Systems (ISICAS), Venice, Italy, Aug., 2019
2019 Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Sapporo, Japan, May, 2019, pp. 1-4" target='_blank'> K.-C. Wu, M.-S. Wu, and H.-C. Hong, " Multiple correlation estimation based digital background calibration scheme for pipelined ADCs," Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Sapporo, Japan, May, 2019, pp. 1-4
2018 presented in Progress In Electromagnetics Research Symposium (PIERS), Toyama, Japan, Aug., 2018" target='_blank'>H.-C. Hong, Y. Chiu, and C.-N. Kuo, "Design of high-Q coils on flexible PCB for resonant magnetic coupling wireless power transfer systems," presented in Progress In Electromagnetics Research Symposium (PIERS), Toyama, Japan, Aug., 2018
2018 Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-4" target='_blank'>H.-C. Hong and Y. Chiu, "A 0.20-V to 0.25-V, Sub-nW, rail-to-rail, 10-bit SAR ADC for self-sustainable IoT applications," Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-4
2018 Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-5" target='_blank'>M.-S. Wu and H.-C. Hong, "Digital background calibration scheme for Pipelined ADCs using multiple-correlation estimation," Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Florence, Italy, May, 2018, pp. 1-5
2018  Proc. Workshop on Synthesis and System Integration of Mixed Information Technologies (SASIMI 2018), Matsue, Japan, Mar., 2018, pp. 26-29" target='_blank'> C,-K, Yang and H.-C. Hong, "A firmware for improving the writing performance of multi-chip MLC NAND flash memory systems," Proc. Workshop on Synthesis and System Integration of Mixed Information Technologies (SASIMI 2018), Matsue, Japan, Mar., 2018, pp. 26-29
2017 Proc. the 17th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Kanazawa, Japan, Nov., 2017" target='_blank'>Y. Chiu and H.-C. Hong, " Electromagnetic energy harvester with embedded ferrofluid in PCB technology," Proc. the 17th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS), Kanazawa, Japan, Nov., 2017
2017 Proc. IEEE Asian Test Symposium (ATS), Taipei, Taiwan, Nov., 2017 (EI, IEEE) " target='_blank'>P. M. Law, C.-W. Wu, H.-C. Hong, and L.-Y. Lin,  " An enhanced boundary scan architecture for inter-die interconnect leakage measurement in 2.5D and 3D packages," Proc. IEEE Asian Test Symposium (ATS), Taipei, Taiwan, Nov., 2017 (EI, IEEE) 
2017 presented in Progress In Electromagnetics Research Symposium (PIERS), St. Petersburg, Russia, May, 2017" target='_blank'>H.-C. Hong, " Analysis for the Optimal Designs of Two-coil Inductive Coupling Wireless Power Transfer Systems," presented in Progress In Electromagnetics Research Symposium (PIERS), St. Petersburg, Russia, May, 2017
2017 Proc. IEEE International Conference on Applied System Innovation (CASI), Sapporo, Japan, May, 2017 (EI, IEEE)" target='_blank'>H.-C. Hong, L.-Y. Lin, and C.-J. Liu, " Design of an On-Scribe-Line 12-bit Dual-Slope ADC for Wafer Acceptance Test," Proc. IEEE International Conference on Applied System Innovation (CASI), Sapporo, Japan, May, 2017 (EI, IEEE)
2017  Proc. the 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), Kaohsiung, Taiwan, Jun., 2017" target='_blank'>Y. Chiu, H.-C. Hong, and C.-M. Chang, " Three-axis CMOS MEMS inductive accelerometer with novel Z-axis sensing scheme," Proc. the 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers), Kaohsiung, Taiwan, Jun., 2017
2016 IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE)" target='_blank'>Y. Chiu, H.-C. Hong, and C.-W. Lin, "Inductive CMOS MEMS accelerometer with integrated variable inductors," IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE)
2016 Proc. the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), Slovakia, April, 2016 (IEEE) " target='_blank'>H.-Y. Huang, S.-Z. Yen, J.-H. Chen, H.-C. Hong, K.-H. Cheng, " Low-Voltage Indoor Energy Harvesting Using Photovoltaic Cell," Proc. the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), Slovakia, April, 2016 (IEEE)
2016 Proc. Asia-Pacific Conference of Transducers and Micro-Nano Technology, APCOT 2016, Japan (2016)  " target='_blank'>Y. Chiu, H.-C. Hong, and W.-H. Hsu, "Effect of asymmetric structures on output enhancement in electromagnetic energy harvesters fabricated by rigid-flex PCB technology," Proc. Asia-Pacific Conference of Transducers and Micro-Nano Technology, APCOT 2016, Japan (2016) 
2015 Proc. IEEE International Symposium on Next-Generation Electronics (ISNE), 2015, pp. 1-4 (IEEE)" target='_blank'>C.-Y. Chiang, L.-Y. Lin, H.-C. Hong, "Design and experimental results of a wireless power receiver for the water pollution detection system," Proc. IEEE International Symposium on Next-Generation Electronics (ISNE), 2015, pp. 1-4 (IEEE)
2015 C.-Y. Chiang, H.-C. Hong, J.-C. Chiao, L.-Y. Lin, and Y. Chiu, “A wirelessly-powered implantable stimulator for relieving gastroparesis symptoms,” in Proc. the 4th International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Fukuoka, Japan, Dec., 2015
2015 IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE)" target='_blank'>Y. Chiu, H.-C. Hong, and C.-W. Lin, "Inductive CMOS MEMS accelerometer with integrated variable inductors," IEEE MEMS Conf. 2016, China, pp. 974-7 (IEEE)
2014 in Proc. IEEE Sensors Conference, Valencia, Spain, November, 2014 , pp. 209-212 (IEEE)" target='_blank'>H.-C. Hong, Y.-T. Chen, S.-F. Hung, C.-C. Wu, and Y. Chiu, "A cost-effective angle demodulator IC for path matched differential interferometry based sensors," in Proc. IEEE Sensors Conference, Valencia, Spain, November, 2014 , pp. 209-212 (IEEE)
2014 in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014 (IEEE) " target='_blank'>R.-Z. Kuo and H.-C. Hong, "A 17-nW, 0.5V, 500S/s, Rail-to-Rail SAR ADC with 8.1 Effective Number of Bits", in Proc. the International VLSI Design, Automation and Test Symposium (VLSI-DAT), Hsinchu, pp. 1-4, April, 2014 (IEEE)
2014 in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Melbourne, Australia, June, 2014, pp. 1134-1137 (IEEE) " target='_blank'> Y.-W. Chen and H.-C. Hong, " A Fast-Locking All-Digital Phase Locked Loop in 90nm CMOS for Gigascale Systems," in Proc. the IEEE International Symposium on Circuits and Systems (ISCAS), Melbourne, Australia, June, 2014, pp. 1134-1137 (IEEE)
2014 in Proc. IEEE Asian Test Symposium, HangZhou, November, 2014, pp. 63-67, (IEEE)" target='_blank'>S.-F. Hung, L.-Y. Lin, and H.-C. Hong, "A Cost-Effective Stimulus Generator for Battery Channel Characterization in Electric Vehicles," in Proc. IEEE Asian Test Symposium, HangZhou, November, 2014, pp. 63-67, (IEEE)
2013 in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), Tokyo, Japan, March, 2013, pp. 1-4" target='_blank'>C.-C. Chang and H.-C. Hong, "A 5MS/s Fully-Differential SAR ADC with an ENOB of 8.5," in Proceedings of International Conference on Electrical Engineering and Computer Science (EECS), Tokyo, Japan, March, 2013, pp. 1-4
2013 R.-Z. Kuo and H.-C. Hong, “Design of an ultra-low power SAR ADC for biomedical applications,” in Proc. the 2nd International Conference on BioSensors, BioElectronics, BioMedical Devices, BioMEMS/NEMS and Applications (Bio4Apps), Tokyo, Japan, Oct., 2013
2013 L.-Y. Lin and H.-C. Hong, “Design of a fault-injectable Fleischer-Laker switched-capacitor biquad for verifying the static linear behavior fault model,” in Proc. International Asian Test Symposium (ATS), Yi-Lan, Nov., 2013 (EI, IEEE) , pp. 62-66
2012 in Proceedings of the 9th International SoC Design Conference (ISOCC), Jeju, Korea, Nov., 2012, pp.179-184 (IEEE)" target='_blank'>S.-F.. Hung, L.-Y. Lin, and H.-C. Hong, "Testing the Fleischer-Laker switched-capacitor biquad using the diagnosis-after-test procedure,” in Proceedings of the 9th International SoC Design Conference (ISOCC), Jeju, Korea, Nov., 2012, pp.179-184 (IEEE)
2012 Proc. Power MEMS, Atlanta, Dec. 2012, pp. 149-152" target='_blank'>Y. Chiu, R. P. Bargayo, and H.-C. Hong, " Stacked electret energy harvesting system fabricated with folded flexible printed circuit board," Proc. Power MEMS, Atlanta, Dec. 2012, pp. 149-152
2012 Yi Chiu, Hao-Chiao Hong, and Po-Chih Wu “CMOS-MEMS accelerometer with differential LC-tank oscillators,” Proc. IEEE Sensors Conference, October, 2012, pp. 1-4 (IEEE)
2012 in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)" target='_blank'>pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)' target='_blank'>Shao-Fung Hung, Long-Yi Lin, and Hao-Chiao Hong, "A study on the design of a testable Fleischer-Laker switched-capacitor biquad," in Proceedings of International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'12), pp.119-121, Taipei, Taiwan, May, 2012 (IEEE)
2012 Long-Yi Lin, Shao-Feng Hung, and Hao-Chiao Hong, “A Test Procedure to Test for the Capacitor Ratios of a Switched-Capacitor Biquad,” n the 6th VLSI Test Technology Workshop (VTTW), July, 2012
2011 in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE)" target='_blank'>Shao-Fung Hung and Hao-Chiao Hong, "A Fully Integrated Built-in Self-Test Sigma-Delta ADC on a Wireless Test Platform," in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11), pp.78-81, Santa Barbara, California, May, 2011 (IEEE)
2011 Shao-Fung Hung and Hao-Chiao Hong, “Design of a Design-for-Digital-Testability Third-Order Sigma-Delta Modulator,” in Proceedings of IEEE International Mixed-Signals, Sensors, and Systems Test Workshop (IMS3TW'11) , pp.110-113, Santa Barbara, California, May, 2011 (IEEE)
2011 Kin-Man Lei and Hao-Chiao Hong, “A 12-bit 25MS/s Asynchronous SAR ADC,” in Proceedings of the 22nd VLSI Design/CAD Symposium, August, 2011
2010 Rong-Zhou Kuo and Hao-Chiao Hong “An Ultra-low Power Rail-to-Rail Successive Approximation ADC with an 8.3 ENOB,” in Proceedings of the 21st VLSI Design/CAD Symposium, pp.687-690, Aug., 2010
2009 Shao-Fung Hung, Hao-Chiao Hong, and Sheng-Chaun Liang “A Low-Cost Output Response Analyzer for the Built-in-Self-Test S-D Modulator Based on the Controlled Sine Wave Fitting Method,” in Proceedings of the IEEE Asian Test Symposium (ATS), pp.385-388, November, 2009 (IEEE)
2009 Chen-Kang Ho and Hao-Chiao Hong, “A 6-GS/s, 6-bit, At-speed Testable ADC and DAC Pair in 0.13mm CMOS,” in Proceedings of the International Symposium on VLSI Design, Automation, and Test (VLSI-DAT), pp.207-210, April, 2009 (Granted the best paper award, symposium acceptance rate=30%, 53/178) (IEEE)
2008 Hao-Chiao Hong, Sheng-Chaun Liang, and Hong-Chin Song, “A cost effective BIST second-order S-D modulator,” in Proceedings of the IEEE Design and Diagnostics of Electronic Circuits and Systems Workshop (DDECS), pp.314-319, April, 2008 (IEEE)
2007 Sheng-Chaun Liang, Ding-Jyun Huang, Chen-Kang Ho, and Hao-Chiao Hong, “10 GSamples/s, 4-bit, 1.2V, Design-for-Testability ADC and DAC in 0.13um CMOS Technology,” in Proceedings of the IEEE Asian Solid-State Circuits Conference (A-SSCC), pp. 416-419, October, 2007, (acceptance rate=32%, 107/332) (IEEE)
2007 Tsung-Yin Hsieh and Hao-Chiao Hong, “A 1.76uW, 0.9V, 8-bit successive approximation register ADC with fully-differential input capability,” in Proceedings of the 18th VLSI Design/CAD Symposium, pp. 123-127, August, 2007
2006 Hao-Chiao Hong and Sheng-Chaun Liang, “A cost effective output response analyzer for S-D modulation based BIST systems,” in Proceedings of the 15th IEEE Asian Test Symposium (ATS), pp.255-261, Nov. 2006. (IEEE)
2005 Hao-Chiao Hong, “Improving the behavioral simulation accuracy of the design-for-digital-testability second-order S-D modulator,” in the 11th International Mixed-Signal Testing Workshop (IMSTW), Canne, June, 2005 (IEEE)
2004 Hao-Chiao Hong, “Design-for-digital-testability 30MHz second-order S-D modulator,” in Proceedings of the IEEE 2004 Custom Integrated Circuit Conference (CICC) , pp. 211-214, October, 2004 (IEEE)
2004 Hao-Chiao Hong, Cheng-Wen Wu, and Kwang-Ting Cheng, “A S-D modulation based BIST system with a wide bandwidth fifth-order analog response extractor for diagnosis purpose,” Proceedings of the 13th IEEE Asian Test Symposium (ATS), pp. 62-67, KenTing, November, 2004 (IEEE)
2002 Hao-Chiao Hong, Jyun-Liang Huang, Kwang-Ting Cheng, and Cheng-Wen Wu, “On-chip analog response extraction with 1-bit Sigma-Delta modulators,” in Proceedings of the 11th IEEE Asian Test Symposium (ATS), pp. 49-54, Nov., 2002 (IEEE)
1997 Hao-Chiao Hong, Bin-Hong Lin, and Cheng-Wen Wu, “Design and Analysis of multiple-bit Sigma-Delta modulator,” in Proceedings of the IEEE Asia and South Pacific Design Automation Conference (ASPDAC), pp. 419-424, Jan., 1997 (IEEE)
1997 Hao-Chiao Hong and Cheng-Wen Wu, “Optimal integrator gain design of extended MASH high-order S-D modulator,” in Proceedings of the 8th VLSI Design/CAD Symposium, pp. 333-336, Aug., 1997
1996 Hao-Chiao Hong, Shao-Huey Shieh, and Cheng-Wen Wu, “Optimization of the spanning tree carry look-ahead adder,” in Proceedings of the 7th VLSI/CAD symposium, pp. 253-256, Aug., 1996
计画类别 年度 计画名称 参与人 职称/担任之工作 计画期间 补助/委讬或合作机构
研究计画 2015 永续型pH值传感微系统-子计画三:永续型pH值传感微系统之无线传能 与资料传输电路设计技术(II, III) 洪浩乔 主持人 2015.08 ~ 2017.07 科技部
研究计画 2014 永续型pH值传感微系统-子计画三:永续型pH值传感微系统之无线传能 与资料传输电路设计技术(I) 洪浩乔 主持人 2014.08 ~ 2015.07 科技部
产学合作计画 2014 Wireless WAT 洪浩乔 主持人 2014.05 ~ 2015.05 台积电
研究计画 2013 具通讯与容错功能之智慧車用电池模组管理系统-子计画三:具电池通 讯通道特性自我测试功能的电池通讯类比前端积体电路设计 (III) 洪浩乔 主持人 2013.08 ~ 2014.07 科技部
研究计画 2012 具通讯与容错功能之智慧车用电池模组管理系统-子计画四:具电池通讯通道特性自我测试功能的电池通讯类比前端积体电路设计(II) 洪浩乔 计画主持人 2012.07 ~ 2013.08 国科会
研究计画 2012 微型惯性传感元件之讯号处理技术与最佳化设计研究(II)-子计画二:光学式微型惯性传感元件的同调干涉讯号处理芯片设计研究 洪浩乔 计画主持人 2012.01 ~ 2012.12 国科会
研究计画 2011 具通讯与容错功能之智慧车用电池模组管理系统-子计画四:具电池通讯通道特性自我测试功能的电池通讯类比前端积体电路设计(I) 洪浩乔 子计画四主持人 2011.08 ~ 2012.07 国科会
研究计画 2010 具通信功能之車用功率系统芯片-子计画一:車用电源线通讯系统之類比前端积体电路设计(3/3) 洪浩乔 子计画一主持人 2011.07 ~ 2012.08 国科会
研究计画 2009 具通信功能之車用功率系统芯片-子计画一:車用电源线通讯系统之類比前端积体电路设计(2/3) 洪浩乔 子计画一主持人 2009.08 ~ 2010.07 国科会
研究计画 2008 具通信功能之車用功率系统芯片-子计画一:車用电源线通讯系统之類比前端积体电路设计(1/3) 洪浩乔 子计画一主持人 2008.08 ~ 2009.07 国科会
研究计画 2008 适用于使用开路放大器设计之低功率管线式类比数码转换器的数码校正方法 洪浩乔 主持人 2008.01 ~ 2012.08 国科会
研究计画 2007 适用于心电图应用之微瓦级1伏十位元類比數位转换器设计 洪浩乔 主持人 2007.08 ~ 2008.07 国科会
产学合作计画 2005 Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies (PI: Prof. Cheng-Wen Wu of National Tsinghua University) 洪浩乔 Subproject A Co-P.I. 2005.12 ~ 2009.11 经济部
产学合作计画 2005 学界科专: 芯片系统传输链技术开发三年计画 苏朝琴、郑国兴、洪浩乔 分项计画名称:芯片系统内传输链结-实体层设计及内建测试共同主持人 2005.03 ~ 2008.12 经济部
发表日期 专利名称
2016/06/11 Hao-Chiao Hong, Yu-Che Chen, and Shao-Feng Hung, "使用周期性重置积分之角度解调变装置及其方法" ROC patent I538408, issued on Jun. 11, 2016
2015/09/21 Hao-Chiao Hong and Tsung-Yin Hsieh, "估测逐次渐近类比数码转换器中电容权重误差之方法与其应用于校正该逐次渐进类比数码转换器,"  ROC patent I501562, issued on September 21, 2015 
2015/09/21 Hao-Chiao Hong, "超大型电晶体阵列式电气参数测试装置" ROC patent I509267, issued on Sep. 21, 2015 
2015/06/02 Hao-Chiao Hong, Yu-Che Chen, and Shao-Feng Hung, "PERIODICALLY RESETTING INTEGRATION ANGLE DEMODULATION DEVICE AND METHOD USING THE SAME" USA patent US9,048,785B2 issued on Jun. 2, 2015 
2014/12/09 Hao-Chiao Hong and Tsung-Yin Hsieh, "Method for estimating capacitance weight errors and successive approximation analog-to-digital converter using the same," US patent number 8,907,826B2, issued on December 9, 2014
2014/10/11 Hao-Chiao Hong and Yu-Shian Wang, "数码类比转换电路及其权重误差估测与校正方法," ROC patent I456907, issued on Oct. 11, 2014
2014/09/16 Hao-Chiao Hong and Yu-Shian Wang, "DIGITAL-TO-ANALOG CONVERTER (DAC) CIRCUIT AND WEIGHT ERROR ESTIMATION/CALIBRATION METHOD THEREOF," USA patent US 8,836,554B2 issued on Sep. 16, 2014
2012/04/01 Hao-Chiao Hong, “利用数码激发讯号来准确测量放大器开路增益之装置,” ROC patent  I361900 issued on Apr. , 2012.
2012/02/07 Hao-Chiao Hong, “Device for accurately measuring amplifier’s open-loop gain with digital stimuli,” U.S.A. patent US8,112,236B2, issued on Feb. 7, 2012.
2011/11/02 Hao-Chiao Hong, “利用数字激发讯号来准确测量放大器开路增益之装置,” 中国大陆专利, PRC patent ZL 200810002352.5 issued on 2011/11/02 有效期限 2008/01/15- 2028/01/15
2007/06/26 Hao-Chiao Hong, “A reconfigurable switched-capacitor input circuit with digital stimulus acceptability for analog tests,” U.S.A. patent US7,236,116B2, Jun. 26, 2007.
2007/01/01 Hao-Chiao Hong, “于类比测试中可接收数码测试激发讯号之可重新规划切换电容输入电路” ROC patent number I270254, issued on January, 2007
2005/12/06 Hao-Chiao Hong, “Bandgap reference voltage generator with a low-cost, low-power, fast start-up circuit,” U.S.A. patent 6,972,550, Dec. 6, 2005
1996/05/01 Hao-Chiao Hong, “高阶积差式调变器” ROC patent number 077991, issued on May 1, 1996
年度 名称 发表日期 全部作者
2013 Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012.">
Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012.
2013-06-05
2012 Hao-Chiao Hong, Shao-Feng Hung, Chih-Chien Chang, Yu-Shian Wang, and Kin-Man Lei, “Design of a power line communication SoC for automobiles, Subproject- I: Design of the analog front end IC for power line communication on automobiles” Joint Research Project NSC 99-2220-E-009-023- final report, National Science Council, Taiwan, R.O.C., August, 2011 2012-07-08
2011 Hao-Chiao Hong, Ming-Ta Ho, Kun-Chih Wu, and Yi-Wey Chen “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 2011-08-01
2011 Hao-Chiao Hong, Shao-Feng Hung, Zhi-Jian Chang, Yu-Shian Wang, and Kin-Man Lei “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC98-2220-E-009 -036 -) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 2011-08-01
2011 Hao-Chiao Hong, Ming-Ta Ho, and Kun-Chih Wu,, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Tsung-Yin Hsieh, Zhi-Jian Chang, and Wai-Jay Fang “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC97-2220-E-009 -048 -) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 97-EC-17-A-01-S1-002 final report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2009. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “A 1-V, 10-bit micro-Watt ADC for ECG applications” Research Project NSC 96-2221-E-009-232- final report, National Science Council, Taiwan, R.O.C., August, 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 96-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2008. 2011-08-01
2011 Hao-Chiao Hong, Yung-Shun Chen, and Wai-Jay Fang “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 96-EC-17-A-01-S1-037 final report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2008. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Fang-Yi Su, “ Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 95-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2007. 2011-08-01
2011 Hao-Chiao Hong, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC95-2221-E009-344 final report, National Science Council, Taiwan, R.O.C., August, 2007. 2011-08-01
2011 Hao-Chiao Hong, Chen-Kang Ho, and Yung-Shun Chen, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 95-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2007. 2011-08-01
2011 Hao-Chiao Hong, Sheng-Chaun Liang, Hong-Chin Song, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for     Modulators ” Joint Research Project 94-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2006. 2011-08-01
2011 Hao-Chiao Hong and Guo-Ming Lee, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC94-2215-E009-081 final report, National Science Council, Taiwan, R.O.C., August, 2006. 2011-08-01
2011 Hao-Chiao Hong, Ding-Jyun Huang, and Chen-Kang Ho, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC.” Joint Research Project 94-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2006. 2011-08-01
2011 Hao-Chiao Hong, “Ultra-Low Power and Digitally Testable Analog-to-Digital Converter.” Research Project NSC93-2215-E009-050 final report, National Science Council, Taiwan, R.O.C., August, 2005. 2011-08-01
2011 邱俊诚, 洪浩乔, 及黄鼎钧, "Design of the MEMS Gyro driver,"工研院系统与航太技术发展中心委讬技术开发合作案, Dec., 2004. 2011-08-01
国家 学校名称 系所 学位 期间
台湾 清华大学 电机系 博士 ~ 2003.06
台湾 清华大学 电机系 硕士 1990.09 ~ 1992.06
台湾 清华大学 电机系 学士 1986.09 ~ 1990.06
服务机关名称 单位 职务 期间
交通大学 电机工程学系 教授 2012.08 ~ 迄今
交通大学 电机工程学系 副教授 2009.03 ~ 2012.07
交通大学 电机与控制工程学系 副教授 2008.08 ~ 2009.03
交通大学 电机与控制工程学系 助理教授 2004.02 ~ 2008.08
积丞科技 类比矽智产部 资深经理 2001.08 ~ 2004.01
台积电 设计服务处 主任工程师 1997.06 ~ 2001.06
类别 年度 奖项名称 颁奖单位
校内荣誉事项 2018 优良教学奖 交通大学电机资讯学院在职专班
校内荣誉事项 2018 电机学院优良教学奖 交通大学电机学院
校外荣誉事项 2017 指导学生张岂铭获2017 CIC 芯片制作成果发表会 微机电组 优等设计奖(与邱一教授同获) 国家实验院芯片设计中心
校内荣誉事项 2017 电机学院杰出教学奖 交通大学电机学院
校外荣誉事项 2016 指导学生林龙逸获最佳论文奖 The 10th VLSI Test Technology Workshop
校内荣誉事项 2016 电机学院杰出教学奖 交通大学电机学院
校内荣誉事项 2016 电机资讯学院杰出教学奖 电机资讯学院
校外荣誉事项 2013 指导学生吴柏奇荣获2013 CIC 芯片制作成果发表会 微机电组 特优奖(与邱一教授同获) 国家芯片系统设计中心
校外荣誉事项 2012 指导学生洪绍峰荣获2012 CIC 芯片制作成果发表会 类比电路组 优良设计奖 国家芯片系统设计中心
校外荣誉事项 2012 指导学生洪绍峰同学荣获2012金矽奖评审团钻石大赏 旺宏电子
校外荣誉事项 2010 指导学生何振纲荣获2009 International Symposium on VLSI Design, Automation and Test Best Paper Award International VLSI-DAT Symposium
校外荣誉事项 2010 指导学生洪绍峰荣获2010 CIC 芯片制作成果发表会 类比电路组 佳作设计奖 国家芯片系统设计中心
校外荣誉事项 2010 2010教育部前瞻系统芯片设计人才培育先导型计画教材优等(与邱一教授同获) 教育部
校外荣誉事项 2009 指导学生谢宗殷、郭荣洲荣获2009CIC芯片制作成果发表会佳作设计奖(类比) 国家芯片系统设计中心
校外荣誉事项 2009 指导学生陈永顺、方韦杰荣获2009CIC芯片制作成果发表会优良设计奖(类比) 国家芯片系统设计中心
校外荣誉事项 2008 指导学生何振纲、陈永顺荣获国家芯片系统设计中心 2008 CIC芯片制作成果发表会 佳作设计奖 国家芯片系统设计中心
校外荣誉事项 2007 指导研究生李国铭获2007年CIC优良芯片设计类比组佳作 国家芯片系统设计中心
校外荣誉事项 2007 指导研究生黄鼎钧、何振纲获2007年CIC优良芯片设计类比组佳作 国家芯片系统设计中心
校外荣誉事项 2006 指导学生黄鼎钧、何振纲荣获全国大学院校IC设计竞赛类比电路设计(不分组) 优等 教育部
校内荣誉事项 2005 94学年第一学期绩优导师奨 交通大学
年度 月份 着作名称 其他
2012 4 Hao-Chiao Hong, Shen-Pai Lin, Yi-Huang Liu, Hung-Yi Wen, Po-Chih Wu, Yi-Wey Chen, Kin-Man Lei, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” Research Project NSC 97-2221-E-009-169-MY3 final report, National Science Council, Taiwan, R.O.C., April, 2012. 技术报告
2011 8 Hao-Chiao Hong, Shao-Feng Hung, Chih-Chien Chang, Yu-Shian Wang, and Kin-Man Lei, “Design of a power line communication SoC for automobiles, Subproject- I: Design of the analog front end IC for power line communication on automobiles” Joint Research Project NSC 99-2220-E-009-023- final report, National Science Council, Taiwan, R.O.C., August, 2011 技术报告
2010 8 Hao-Chiao Hong, Ming-Ta Ho, Kun-Chih Wu, and Yi-Wey Chen “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 技术报告
2010 8 Hao-Chiao Hong, Shao-Feng Hung, Zhi-Jian Chang, Yu-Shian Wang, and Kin-Man Lei “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC98-2220-E-009 -036 -) annual report, National Science Council, Taiwan, R.O.C., August, 2010. 技术报告
2009 12 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 97-EC-17-A-01-S1-002 final report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2009. 技术报告
2009 8 Hao-Chiao Hong, Ming-Ta Ho, and Kun-Chih Wu,, “A digital calibration scheme for the design of the low power pipelined ADC with open-loop amplifiers” (NSC97-2221-E-009 -169 -MY3) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 技术报告
2009 8 Hao-Chiao Hong, Sheng-Chaun Liang, Tsung-Yin Hsieh, Zhi-Jian Chang, and Wai-Jay Fang “Design of a power line communication SoC for automobiles (PI: Prof. C.-C. Su, National Chiao Tung University), Subproject-I: Design of the analog front end IC for power line communication on automobiles (NSC97-2220-E-009 -048 -) annual report, National Science Council, Taiwan, R.O.C., August, 2009. 技术报告
2008 12 Hao-Chiao Hong, Sheng-Chaun Liang, Shao-Feng Hung, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 96-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2008. 技术报告
2008 8 Hao-Chiao Hong, Sheng-Chaun Liang, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “A 1-V, 10-bit micro-Watt ADC for ECG applications” Research Project NSC 96-2221-E-009-232- final report, National Science Council, Taiwan, R.O.C., August, 2008. 技术报告
2008 3 Hao-Chiao Hong, Yung-Shun Chen, and Wai-Jay Fang “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 96-EC-17-A-01-S1-037 final report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2008. 技术报告
2007 12 Hao-Chiao Hong, Sheng-Chaun Liang, Fang-Yi Su, “ Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for Σ−Δ Modulators ” Joint Research Project 95-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2007. 技术报告
2007 8 Hao-Chiao Hong, Rong-Zhou Kuo, and Tsung-Yin Hsieh, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC95-2221-E009-344 final report, National Science Council, Taiwan, R.O.C., August, 2007. 技术报告
2007 3 Hao-Chiao Hong, Chen-Kang Ho, and Yung-Shun Chen, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC” Joint Research Project 95-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2007. 技术报告
2006 12 Hao-Chiao Hong, Sheng-Chaun Liang, Hong-Chin Song, “Project HOY (Hypothesis, Odyssey and Yield)—Advanced Wireless Test Platform and Technologies, Subproject-A, Item I: BIST Techniques for     Modulators ” Joint Research Project 94-EC-17-A-01-S1-002 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., Dec., 2006. 技术报告
2006 8 Hao-Chiao Hong and Guo-Ming Lee, “The Design and Fabrication of an Ultra Low Power Micro-sensing Module for Wireless Sensor Networks, Subproject-V: Design-for-digital-testability analog-to-digital converter with ultra-low power consumption.” Research Project NSC94-2215-E009-081 final report, National Science Council, Taiwan, R.O.C., August, 2006. 技术报告
2006 3 Hao-Chiao Hong, Ding-Jyun Huang, and Chen-Kang Ho, “Circuit & system design and verification platform of SoC on-chip transmission links, Subproject-B: Physical Layer Design, Item III: Design of 10GS/s ADC and DAC.” Joint Research Project 94-EC-17-A-01-S1-037 annual report, Ministry of Economic Affairs, Taiwan, R.O.C., March, 2006. 技术报告
2005 8 Hao-Chiao Hong, “Ultra-Low Power and Digitally Testable Analog-to-Digital Converter.” Research Project NSC93-2215-E009-050 final report, National Science Council, Taiwan, R.O.C., August, 2005. 技术报告
2004 12 邱俊诚, 洪浩乔, 及黄鼎钧, "Design of the MEMS Gyro driver,"工研院系统与航太技术发展中心委讬技术开发合作案, Dec., 2004. 技术报告